Yamaha DSP-AZ1 Owner's Manual page 11

w
ON SCREEN
Selects the On-Screen Display mode for your video monitor (see
page 33).
e
SLEEP
Sets the sleep timer.
r
TEST
Selects the test mode.
t
Remote control programming function buttons/
MACRO switch
Programs new remote control functions, sets manufacturer codes,
renames the input source names, or uses the Macro feature.
y
Input section
Selects the input source.
Press an input selector button repeatedly to select the input mode.
u
6CH INPUT
Switches to the 6CH INPUT mode when using an external decoder
(see page 42).
i
DSP program group/numeric buttons
Select DSP programs or numbers according to the position of
10KEY/DSP. (Press a button repeatedly to select a DSP program
within that group.)
o
MUTE
Mutes the sound. While the mute function is on, "MUTE ON"
appears on the front panel display.
p
VOLUME +/–
Increases or decreases the volume level.
a
STEREO/EFFECT
Switches the effect speakers (center, front, rear, and rear center) on
and off. If the output of these speakers is switched off, all DTS and
Dolby Digital audio signals are directed to the main left and right
channels except for the LFE channel.
s
PARAMETER/SET MENU
Selects the PARAMETER mode or SET MENU mode.
You can use / /+/– to adjust DSP program parameter values or
SET MENU items according to the position of this switch.
d
/ /+/–
Selects and adjusts DSP program parameters and SET MENU items
according to the position of PARAMETER/SET MENU.
f
Cover
Slides down to show the setup buttons.
CONTROLS AND FUNCTIONS
E-
9