Yamaha E580 Operation Manual page 12

C
Video NTSC/PAL Switch (General Model only)
Set this switch to the position corresponding to the standard
that your video equipment employs.
D
Voltage Selector (General Model only)
Be sure to set to the line voltage in your area before applying
power. Consult your dealer if unsure of the correct setting.
NOTE: Even if an external power amplifier is connected to the REAR
or CENTER line output jacks, the corresponding internal amplifier will
not be turned off and output will be available at the speaker
terminals.
10
VIDEO SUPERIMPOSE
If you connect your video monitor to this unit and send video
signals to the video monitor via this unit, you can take advantage
of this unit's capability to display program titles, parameter data
and information about other various settings and adjustments on
your video monitor's screen. This information will be
superimposed over the video image.
If no video signal is input to this unit, the information will be
displayed over a blue colored background.
P01 CONCERT HALL
NOTE: The program titles, parameter data and other information
are also displayed on the display panel of this unit.
CONCERT HALL
DSP