Yamaha GX-70 Owner's Manual page 67

HOW TO USE THE BUILT-IN TIMER
MINI COMPONENT SYSTEM
GX–70
1
2
3
PROGRAM
MUSIC
CD
INPUT
DOWN
USER MEMORY
TAPE 1/2
REC/PAUSE
MODE
DOLBY NR
POWER
PHONES
TIMER REC
AUTO/MAN'L
TIMER
HOUR
1
PLAYBACK
EJECT
POWER
CD
1 2
1 2
6 7
6 7
A B
TIME PROG TAPE
MODE REPEAT RANDOM
DISC SKIP
PLAY
REC/PAUSE TAPE 1/2
CENTER/REAR
TEST FLAT
/DELAY
LEVEL MUSIC
POWER
SLEEP
SLEEP
VOLUME
POWER
DISC CHANGE
OPEN/CLOSE
VOLUME
DOWN UP
INPUT
UP
NORMAL
HIGH
DUBBING
MEMORY
Active Servo
Technology
TIME ADJ
MIN
2
REC/PLAYBACK
EJECT
3 4 5
3 4 5
8 PRESET
8 9 0
C D E
+
EDIT I0
OPEN/CLOSE TUNER
STOP PLAY/PAUSE
STOP PLAY
TAPE
PROGRAM USER
INPUT
Sleep timer operation
This unit can be turned off automatically.
1
Play the desired sound source.
2
Press the SLEEP button. "SLEEP" appears on the display,
and soon it is replaced by "2h00m".
3
Press the SLEEP button repeatedly until the desired sleep
time appears on the display. The display will change as
described below. [Time is displayed by the hour (h) and
the minute (m).]
2h00m 1h30m
(Sleep timer is off.)
* The original display mode will resume about 4 seconds
after the selection is made.
* The SLEEP indicator will light up to indicate that the
sleep timer is on.
4
The unit will turn off automatically when the selected sleep
time passes.
To confirm the sleep time setting
Press the SLEEP button once. "SLEEP" appears on the
display, and soon it is replaced by the remaining time of the
selected sleep time.
To change the sleep time
While the SLEEP indicator is being illuminated, press the
SLEEP button repeatedly until the desired time appears.
To stop the sleep timer operation
Press the POWER switch, or press the SLEEP button
repeatedly until "OFF SLEEP" appears on the display.
(The SLEEP indicator will go out.)
Using the timer and the sleep
timer at the same time
1
Prepare timer play. (See page 52 and 53.)
* Do not turn the power of this unit off after the timer
setting is finished.
2
Press the SLEEP button and set the sleep time.
When the sleep timer operation finishes, the timer begins
functioning to turn the source on at the preset time.
Note
Do not make the timer time setting so that the timer will start
during sleep timer operation. (Since sleep timer operation
has priority, the timer will not operate.)
E-55
1h00m 0h30m
OFF SLEEP