Other Recordings - Yamaha GX-3 Owner's Manual

OTHER RECORDINGS

POWER
CD
1 2
1 2
4 5
4 5
7 8
7 8
0
CD/TUNER
0
PLAY/PAUSE
STOP TIME
PROG TAPE
MUSIC
LOCATION
USER
6, 1 1
1
6, 1 1
5 4
7, 2 2 3
1
TUNER TAPE
3 FM/AM
3
6
6
9
DISPLAY
9
+10
SLEEP
AUX
REPEAT
EDIT RANDOM
7, 2 2
•
When recording important selections, be sure to make a
preliminary test to ensure that the desired source material
is being properly recorded with good sound quality.
•
The automatic recording level control circuit automatically
controls the level of the input signal used for recording.
•
Adjusting the VOLUME control and using the built-in
graphic equalizer and sound field processor have no
effect on the recorded sound.
•
For the tape deck, the deck which can be used for
recording is the DECK B only. When recording, be sure to
load a tape into the DECK B cassette compartment.
Recording from the built-in tuner
1
Press the TUNER input selector button.
2
Tune to the desired station. (Refer to the "TUNING
OPERATION" on page 15 and 16.)
3
Load a tape into the DECK B cassette compartment.
4
When recording with the Dolby NR system, press the
Dolby B NR button so that the indicator over the button
lights up. If not, set it off.
* For details on the Dolby noise reduction, refer to the
"Dolby NR (Noise Reduction) system" on page 20.
5
Select the reverse mode "
side, or " " for continuous recording on both sides by
pressing the reverse MODE selector button.
6
Press the REC/PAUSE button.
* The indicator over the button will light up and the play
direction indicators will flash.
7
Press the play
button to record on side B.
* For continuous recording on both sides, begin on side
A. Recording stops automatically at the end of side B.
To stop recording temporarily
1 1
Press the REC/PAUSE button.
2 2
To resume recording, press the play button whose
indicator is flashing.
To stop recording
Press the stop button.
E-25
" to record on only one
button to record on side A, or the play