Using Station Preset Feature - Yamaha YAS-70 Owner's Manual

FM tuning

Using station preset feature

■ Automatic station preset
First, scan the FM stations with strong signals and store them to the memory by using the automatic preset station
feature. You can store up to 40 FM stations (A1 to E8: 8 preset station numbers in each of the 5 preset station groups).
y
You can specify the preset number from which this system stores FM stations. Press A E or A E and then +/– repeatedly after you
perform step 2 to select the preset station number under which the first station will be stored.
Notes
• Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station
number.
• If the number of received stations does not reach 40 (E8), automatic preset tuning automatically stops after searching for all the
available stations.
If the desired station is not stored, or a station is not stored to the desired preset group and number, preset the station
manually. Refer to "Manual station preset" on page 19 for details.
■ Recalling the preset stations
18
En
Press FM to select this system to the FM tuner
1
1
mode.
"FM" appears in the front panel display.
Press and hold MEMORY for more than 3
2
seconds.
2
The preset station number as well as the MEMORY and
AUTO indicators flashes. After approximately 5 seconds,
automatic presetting starts from the current frequency and
proceeds toward higher frequencies.
When automatic preset tuning is completed, the front panel
display shows the frequency of the last preset station.
Press A E or A E repeatedly to select the desired
1
2
preset station group (A to E).
Press +/– repeatedly to select the desired preset
2
station number (1 to 8).
1
Preset station group and
Flash
AUTO
A1:FM 88.9 MHz
Flashes
A1:FM 88.9 MHz
Preset FM station
number
MEMORY