3. Clean the external glass pane and the
internal pane which you have removed
previously. Use absorbent kitchen roll. In
case of stubborn dirt, wash with a damp
sponge and neutral detergent.
4. Refit the panes in the reverse order of
removal.
5. Reposition the internal glass pane. Take
care to centre and insert the 4 pins into
their housings in the oven door by
applying slight pressure.
Cleaning and maintenance
Removing racks/trays support frames
Removing the rack/tray support frames
enables the sides to be cleaned more
easily.
To remove the rack/tray support frames:
• Pull the frame towards the inside of the
oven to unhook it from its groove A, then
slide it out of the seats B at the back.
• When cleaning is complete, repeat the
above procedures to put the rack/tray
support frames back in.
67