All Part Control; Editing In All Part - Yamaha MU80 Owner's Manual

All Part Control

The All Part controls include: Device Number, Master Volume, Master
Attenuator, Reverb Return, Chorus Return, Variation Return and Transpose.
to or subtract from their individual values. For example, if Note Shift on
one Part is set to –12, and Transpose (in All Part) is set to +12, that Part's
pitch value will actually be 0 or normal.
Selecting All Part Control
To select All Part control, press both PART q buttons simultaneously. (or
press the EXIT button). ("All" appears in the PART section of the display.)
E d i t i n g i n A l l P a r t
Operation
1 Select the desired control for all Parts by using the SELECT
2 Change the value of the selected control by using the VALUE
Device Number (DevNo.)
Keep in mind that these controls affect all Parts equally, and either add
w buttons.
q buttons.
Graphically indicates current Device Number setting.
This determines the Device Number for the MU80, a kind of MIDI
"identification" number to distinguish between multiple units. For
MULTI MODE
4 1