Selecting A Performance And Its Individual Parts - Yamaha MU50 Owner's Manual

Selecting a Performance and its Individual Parts

To call up a Preset or Internal Performance and select individual
Parts of that Performance:
1 From the Performance Play mode (see section above), press the PART
q buttons simultaneously, so that the All Part display is shown.
NOTE
The display is automatically set to All Part when the Performance Play mode is selected.
2 Use the SELECT
use the VALUE
(Pre) or Internal (Int).
Preset bank:
Internal bank:
Indicates All Part display.
SELECT w buttons to select the Bank parameter, then SELECT SELECT
SELECT
VALUE q buttons to select the desired bank, Preset VALUE VALUE
VALUE
Bottom half of keyboard player icon is shown in reverse
display to indicate Preset Performance bank.
Top half of keyboard player icon is shown in reverse
display to indicate Internal Performance bank.
PERFORMANCE MODE
PART PART PART PART
67