Setting Up; Power Supply Connections; Accessory Jacks - Yamaha YPP-100 Light Piano Owner's Manual

Setting Up

PA-5D
CAUTION
• Before connecting the YPP-100 to other electronic components, turn off the power for all compo-
nents. Before turning the power on or off for all components, set all-volume levels to minimum.
Stereo System
10
YPP-100

Power supply connections

Using An AC Power Adaptor
Z
Make sure that the STANDBY/ON switch of the YPP-100 is set to
STANDBY.
X
Connect the AC adaptor (PA-5D, PA-5C or other adaptor specifi-
cally recommended by Yamaha) to the power supply jack.
C
Plug the AC adaptor into an AC outlet.
CAUTION
• Never interrupt the power supply (e.g. unplug the AC adaptor) during any
YPP-100 record operation! Doing so can result in a loss of data.
WARNING
• Use ONLY a Yamaha PA-5D or PA-5C AC Power Adaptor (or other adaptor
specifically recommended by Yamaha) to power your instrument from the AC
mains. The use of other adaptors may result in irreparable damage to both
the adaptor and the YPP-100.
• Unplug the AC Power Adaptor when not using the YPP-100, or during
electrical storms.
• Plugging or unplugging the AC power adaptor will reset the YPP-100 to the
defaults.

Accessory Jacks

Using the OUTPUT R and L/L+R Jacks
The OUTPUT R and L/L+R jacks deliver the output of the YPP-100
for connection to an instrument amplifier, mixing console, PA system,
or recording equipment. If you will be connecting the YPP-100 to a
monaural sound system, use only the L/L+R jack. When a plug is
inserted into the L/L+R jack only, the left- and right-channel signals are
combined and delivered via the L/L+R jack so you don't lose any of the
YPP-100's sound.
CAUTION
• When the YPP-100's OUTPUT jacks are connected to an external sound system,
first turn the YPP-100 power on, and then the power to the external amplifier/
speaker system. Reverse this order when turning the power off.
..............................................................
..................................