Modify Velocity - Yamaha QY70 Owner's Manual

Increases or decreases the velocity values of all notes in the speci-
fied track and range of measures.
The "TR" parameter selects the track to be affected by the Modify
Velocity job: D1, D2, PC, BA, C1, C2, C3, C4.
The "M" parameters above the graphic bar are used to specify the
first measure:beat and last measure:beat of the range to be modified.
The "SetAll" parameter makes it possible to set all notes in the
specified range to a single velocity value from "1" to "127". "Set All" can
also be turned "Off" when the "Rate" and "Offset" parameters, below,
are to be used for velocity modification.
The "Rate" parameter allows you to change the Velocity value of
each note without affecting the velocity ratios between notes (proportional
change). A setting of
"100%" maintains the
absolute velocity differ-
ences between notes,
while lower (higher) values
will decrease (increase)
the velocity values to the
corresponding percentage,
resulting in a narrower
(wider) dynamic range.
The range is from "0%" to
"200%".
T h e P a t t e r n

02 : Modify Velocity

Original
velocities
Rate = 50%
Rate = 150%
J o b s
First measure. Last measure.
First beat. Last beat.
96 64 32
48 32 16
127 96 48


 
127 96
63 48
127 127
163
11