Yamaha QY20 Owner's Manual page 58

B
Select the "Pat" track to
record pattern & section
changes.
N
Record.
Realtime recording in progress.
Minus measure numbers during
count-in.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
5
Easy Accompaniment for Other Instruments
Move the cursor to the track area of the display, and then shift the
cursor sideways to select "Pat." Once selected, move the cursor verti-
cally to move to other areas of the screen. An underline will remain
below the selected track no matter where you move the cursor.
Select "Pat" to record pattern changes.
Press the [ / ] key to begin recording pattern changes. The met-
ronome will sound and you'll be given a two-measure count-in prior
to the first measure actually recorded. The count-in is also indicated
m
by negative numbers in the "Meas"
parameter. If a 4/4 pattern is se-
lected, for example, the count-in will
run from measure " 08" to " 01",
then recording will begin from
measure "001".
55