3: Transpose - Yamaha QY20 Owner's Manual

6
Creating Original Patterns
3:
Transpose
ENTER
Press [ 1/NO ]
to cancel.
100
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Transposes all notes in the specified track up or down by the speci-
fied number of semitones. Minus ( ) values transpose down while
plus (+) values transpose up.
Track to be transposed
(C1, C2 or Ba).
Amount or transposition in
semitones ( 12 ... +00 ... +12).
– 1 + 1
NO YES
Of course, you can transpose all tracks as required to shift the entire
pattern to a different key, but you could also transpose only the C2 track,
MUSICAL
NOTE for example, to produce an interval (and therefore harmony) between the
C1 and C2 tracks.
After setting the parameters as required, press
[ ENTER ] . "Are you sure?" will appear on the
display. Press [ +1/YES ] to confirm that you
want to go ahead with the transpose operation,
or press [ 1/NO ] to cancel.