Format - Yamaha PortaTone PSR-450 Owner's Manual

3
Select the file you want to delete.
Use the [+] and [–] buttons to select the name of the file you want to delete.
You can abort the delete operation by pressing the [UTILITY] button twice.
4
Press the [EXECUTE] button.
5
Execute the delete operation.
Press the [+/YES] button to begin execution of the delete operation. "Delet-
ing" will appear on the display while the file is being deleted.
You can abort the delete operation by pressing the [–/NO] button.
Exit from the delete mode by pressing the [UTILITY] button twice.
"Complete" will appear on the display when the delete operation has been
completed.

Format

Standard floppy disks (3.5-inch 2HD or 2DD types) must be formatted by the
PSR-450 before they can be used for saving PSR-450 data.
■ Formatting an Unformatted Floppy Disk
q Insert a new unformatted floppy disk in
the disk drive.
The PSR-450 will automatically enter the for-
mat mode when an unformatted disk is
inserted in the drive.
FILENAME
d-U
FILENAME
YES
Deleting
d-U
Complete
---
Format?
CUE
Floppy Disk Save and Load
NOTE
• If the disk contains no file, the
display shows "No file" indicat-
ing that the Delete function is
not possible.
CAUTION
• While the file is being deleted
("Deleting" message appears
on the display), never eject
the floppy disk or turn the
power off.
NOTE
• When the floppy disk's write-
protect tab is set to ON (see
page 6) or the disk is a pur-
posely "copy-protected" disk, a
"Protect" message appears,
indicating that the Format func-
tion is not possible.
CAUTION
• If a disk that cannot be read
by the PSR-450 is inserted
into the disk drive, it will be
treated the same as an unfor-
matted floppy disk. Take care
not to erase important data
by accidentally formatting a
disk.
PSR-450 Owner's Manual
59