Repeat Playback - Yamaha PortaTone PSR-450 Owner's Manual

2
Use the number buttons [0] ~ [9] or the [+] and [–] buttons to set the song vol-
ume from 000 to 127 as required.

Repeat Playback

You can specify a section of a song — "A" is the start point and "B" is the end
point — for repeat playback.
1
Play the song and press the [A-B REPEAT] button at the beginning of the sec-
tion you want to repeat (the "A" point).
2
Press the [A-B REPEAT] button a second time at the end of the section you
want to repeat (the "B" point). The specified A-B section of the song will now
play repeatedly.
You can stop repeat playback by pressing the [A-B REPEAT] button while "A-b
REPEAT" is being shown on the display.
REPEAT
A-
REPEAT
A-b
Song Playback Functions
NOTE
• The default song volume value
of "100" can be instantly
recalled by simultaneously
pressing the [+] and [–] buttons.
• Song volume can be adjusted
when a song is selected.
NOTE
• The repeat start and end points
can be specified in one-mea-
sure increments.
• If you want to set the start point
"A" at the very beginning of the
song press the [A-B REPEAT]
button before starting playback
of the song.
PSR-450 Owner's Manual
49