Function Settings; Locating And Editing The Function Settings - Yamaha Portatone PSR-295 Owner's Manual

Function settings

The Function settings include detailed settings for the instrument's voices, effects, split point,
tuning, and more. Button shortcuts can be used to quickly access commonly used settings:
hold a shortcut button for longer than a second to directly access the related setting.

Locating and Editing the Function Settings

1
Press the [FUNCTION] button.
StyleVol
100
2
Use the CATEGORY [ ] and [ ] buttons to
select the required item.
For details on individual settings refer to the FUNC-
TION Setting List on page 63.
Transpos
00
Current item
62
DGX-205/203, PSR-295/293 Owner's Manual
3
Set the value as required using the dial, the
[+] and [-] buttons, or the [0] – [9] number
buttons.
For ON/OFF settings use the [+] button to turn the
function ON and the [-] button to turn the function
OFF. Use the [+] button to begin execution of opera-
tions, or the [-] button to cancel the selected opera-
tion. All these settings can be conveniently reset to
their initial default values by pressing the [+] and [-]
buttons simultaneously. (The exception to this is Ini-
tial Setup Send and Bulk Send, which is an opera-
tion, not a setting.)
• Decrease a
value by 1
• Turn a setting
OFF
Reset a value to
• Cancel an
its default setting
operation
4
If necessary, hold the [FUNCTION] button for
longer than a second to save your settings
to flash memory.
Although all settings are retained by the instrument
while the power is on, your custom settings will be
lost when the power is turned off unless you save
them to flash memory. Simply save the settings to
flash memory by holding the [FUNCTION] button
for more than a second, and your settings will be
retained in flash memory even while the power is off
and will be recalled the next time the instrument is
turned on.
CAUTION
• Do not turn off the power while saving settings, otherwise the
data may be damaged or lost.
Directly enter
numeric values
• Increase a
value by 1
• Turn a setting
ON
• Execute an
operation
Hold for longer
than a second