Changing The Recorded Settings - Yamaha PortaTone PSR-1700 Owner's Manual

The [REWRITE SETTING] button can be used to change the settings of all recordable pa-
rameters for any specified track or pad. You could, for example, use this function to change the
voice or effect used in a SONG MEMORY track.
All data in the following tracks and pads except note on/off, octave, sustain, pitch bend,
modulation, expression, and chord changes:
Z
X
C
V
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Only if you will be rewriting Song Memory settings, use the [MEAS-
URE #] button in conjunction with the [+] and [–] buttons, the number but-
tons, or the data dial to specify the measure at which you want the settings
to be rewritten. The specified measure number will appear on the LCD dis-
play panel.
Press the track or pad button corresponding to the track or pad you want
to alter while holding the RECORDING section [REWRITE SETTING]
button (for a Custom Accompaniment, first select the section you want to
edit). Both the [REWRITE SETTING] and track/pad button indicators
will flash.
For the Song Memory or Multi Pads use the [PLAY/STOP] button to
start playback. Make the required setting changes to the recordable param-
eters at the appropriate point during playback.
If you make any changes during rewrite standby — i.e. after engaging
the Rewrite Setting function but before starting playback — the specified
changes will be at the very beginning of the track/pad data (at the beginning
of the specified measure for the Song Memory).
For a Custom Accompaniment, use the ACCOMPANIMENT CONTROL
section [START/STOP] button or play a note on the keyboard to start play-
back and then make the required setting changes to the recordable param-
eters. Rewriting data in the middle of a Custom Accompaniment pattern
affects the entire track.
Press the track or pad button for which the settings have been rewritten.
55