HP ProBook 450 G8 Maintenance And Service Manual page 61

d. Lift the tape from the connector on the display panel (1), and then disconnect the cable from the
panel (2).
3. Use the following illustration to determine proper adhesive installation locations on the display rear
cover. Before installing the display panel, be sure to connect the display cable to the back of the panel.
The display panel tape is available in the LCD Support Kit as spare part number M23560-001.
4. If you need to remove the camera module:
▲ Use a tool to lift up evenly across the module and peel the module up from the display back cover
(1), and then disconnect the cable from the reverse ZIF connector on the module (2). The camera
module is available as spare part number M29583-001 for HD cameras and M27889-001 for IR
cameras. The microphone module (for use in models without a camera module) is available as
spare part number M27888-001.
Component replacement procedures 53