Preset Song Part Cancel; Synchro Start; Aux Pedal Start/Stop - Yamaha P-120 P-120S Owner's Manual

Yamaha p-120 p-120s

Hide thumbs

Table Of Contents

Table of Contents

The 50 preset songs have separate left- and right-hand parts that can be turned on and off as required so you can

practice the corresponding part on the keyboard. The right-hand part is played by [TRACK 1], and the left-hand part

is played by [TRACK 2].

Turn the Desired Part Off ....................................

Press the [TRACK 1] or [TRACK 2] button to turn the corre-

sponding part off — the corresponding indicator will go out

(these buttons alternately toggle the corresponding part on and

off).

• The parts can be turned on or off even during playback.

NOTE

• The Preset Song Part Cancel function cannot be used during

" ALL" or " rnd" playback.

• The "Preset Song Part Cancel Volume" function described on

page 36 can be used to set the canceled part so that it plays at a

volume from "0" (no sound) to "20". The default setting is "5".

• Both parts are automatically turned ON whenever a new song is

selected.

Start/Stop Playback .............................................

Press the SONG [START/STOP] button to start and stop play-

back as required.

Synchro Start .......................................................

When the Synchro Start function is engaged, playback of the

selected preset song will begin automatically as soon as you start

playing on the keyboard.

To engage the Synchro Start function press the SONG

[START/STOP] button while holding the part button correspond-

ing to the part which is ON. A dot will appear in the lower right

corner of the display. (Repeat the previous operation to disengage

the Syncro Start function.)

Playback will then start as soon as you begin playing on the

keyboard.

• If you hold a track button which is OFF while pressing the SONG

NOTE

[START/STOP] button, that track will be turned ON and the Syn-

chro Start mode will be engaged.

AUX PEDAL Start/Stop........................................

The AUX PEDAL can be assigned to start and stop preset song

playback via the "AUX PEDAL Mode" function described on

page 35.