Chain Function - Yamaha Metronome Owner's Manual

Chain Function

- 1 1
120
Saved songs (song numbers 0-85)
86 songs maximum
Place the songs in any order you like
20 songs (steps) maximum
The grouping of songs saved here
is a Chain Program
A maximum of 10 Chain Programs
like those shown above can be
created and saved.
Changing Song Order
The Chain Function lets you place saved songs
01
in any order you like.
1. Press the CHAIN button to enter the CHAIN
mode.
2. Press the STORE button so that both CHAIN
and STORE are shown on the left side of the
display.
3. Press the CHAIN NO. (BEAT) button to se-
lect the chain program number (0 - 9) to
which you want to save the chain.
4. Rotate the TEMPO dial to select the song
that will become the first step in the chain.
5. Press the START/STOP button and STORE
will flash two times in the display to indicate
that the first step in the chain is saved.
6. Press the SONG/STEP+ button to move to
the next step and enter the setting.
7. Repeat numbers 4 through 6 above to create
a chain program.
* A maximum of 20 steps (songs) can be saved in a
Play the Chain Program
1. Press the CHAIN button to enter the CHAIN
mode.
2. Press the CHAIN NO. button to select the
chain program number that you want to use.
3. Press the START/STOP button to start the
song that is set at the top of the list.
4. Press the START/STOP button to stop the
song and then press the SONG/STEP + but-
ton to start the next song in the list.
* Press the SONG/STEP – button to return to the pre-
chain program.
vious song in the list.
17