Yamaha GW50 Owner's Manual page 21

PANEL CONTROLS AND TERMINALS
With BACKING CONTROL selected —
When pattern is stopped:
Decreases pattern Increases pattern
number by 2 number by 2 (every
(every other odd other odd numbered
numbered pattern). pattern).
When pattern is playing back:
Decreases pattern
number by 2
(every other odd
numbered pattern).
With CHORD RECALL selected —
Plays chord 1 (with Plays chord 2 (with
ASSIGNABLE Pedal ASSIGNABLE Pedal
Switch; assigns Switch; assigns
chord 1). chord 2).
12
PANEL CONTROLS AND TERMINALS
Increases pattern Plays fill in pattern.
number by 2
(every other odd
numbered pattern).
Plays chord 3 (with
ASSIGNABLE Pedal
Switch; assigns
chord 3).
Starts pattern playback.
Pressing once selects CHORD RECALL; holding this and pressing one of
Pedal Switches 1 – 4 assigns current chord to the pressed Pedal Switch.
Holding this enables the Root Select function (see page 78).
Plays ending pattern Stops pattern
(then stops playback). playback.
Pressing once selects CHORD RECALL; holding this and pressing one of
Pedal Switches 1 – 4 assigns current chord to the pressed Pedal Switch.
Holding this enables the Root Select function (see page 78).
Plays chord 4 (with Starts/stops pattern
ASSIGNABLE Pedal playback.
Switch; assigns
chord 4).
Pressing once selects BACKING CONTROL; holding this and pressing one
of Pedal Switches 1 – 4 assigns current chord to the pressed Pedal Switch.
Holding this enables the Root Select function (see page 78).