Master Section - Yamaha EMX5016CF Owner's Manual

Yamaha powered mixer owner's manual
Hide thumbs Also See for EMX5016CF:
Table of Contents

Advertisement

Master Section

ST SUB OUT Jacks
These unbalanced phone jacks output the mixed stereo
signal (L and R), where the level is adjusted by the ST
SUB OUT control
. You would typically use these
jacks to connect to an external mixer or a supplemen-
tary SR system.
REC OUT Jacks
These RCA pin-type unbalanced output jacks can be
used to send the main stereo signal to an external DAT
recorder or cassette recorder. The jacks output the ste-
reo signal pre adjustment by the ST master fader
and graphic equalizer
. As the signal is not adjusted
by these controls, please be sure to make appropriate
level adjustments at the external recording device side.
EFF1/2 ON/OFF Jacks
These phone input jacks are for connection to a sepa-
rately sold FC5 foot switch. The foot switch can be
used as an alternative to the ON switch to toggle the
effector on and off.
ST OUT Jacks
These unbalanced phone jacks output the mixed stereo
signal (L and R), where the level is adjusted by the ST
master fader
. You would typically connect these
jacks to a power amp or powered speakers.
PHONES Jack
Connector for headphones. This is a balanced stereo
phone-type output jack.
LAMP Jack
This XLR 3 pin-type output jack is for connection to
an optional lamp.
Supported lamps: 12 V (AC or DC), max. 5 W. Power
NOTE
of 12 V is supplied between pins 2 and 3. Pin 1 is not
connected.
GEQ (Graphic Equalizer) display
Indicates the GEQ settings. This 9-band GEQ adjusts
the frequency characteristics of the stereo-bus signal
output at the ST OUT jacks
, and SPEAKERS jacks
GEQ +/– Switches
These switches boost or cut the gain of each frequency
band by ±12 dB. The central frequencies for the bands
are: 63, 125, 250, 500, 1k, 2k, 4k, 8k and 16k Hz. The
adjustable gain values are: 0dB, ±1.5dB, ±3dB,
±4.5dB, ±6dB, ±9dB and ±12dB. For intermediate val-
ues not printed on the scale, both the upper and lower
indicators light. (For example, the 0 and +3 indicators
light to indicate a value of +1.5dB.)
GEQ ON Switch
This switch toggles the graphic equalizer on or off.
The switch is illuminated when on.
EMX5016CF Owner's Manual
Reference
Front & Rear Panels
, ST SUB OUT jacks
.
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents