Biostar A10N-9830E User Manual
Hide thumbs Also See for A10N-9830E:

Advertisement

BIOS User Guide
A10N-9830E / A10N-9630E
BIOS Update ������������������������������������������������������������������������������������� 2
UEFI BIOS Setup �������������������������������������������������������������������������������� 6
1� Main Menu ����������������������������������������������������������������������������������� 7
2� Advanced Menu ���������������������������������������������������������������������������� 8
3� Chipset Menu �������������������������������������������������������������������������������20
4� Boot Menu �����������������������������������������������������������������������������������24
5� Security Menu ������������������������������������������������������������������������������26
6� Tweaker Menu �����������������������������������������������������������������������������29
7� Save & Exit Menu �������������������������������������������������������������������������32

Advertisement

Table of Contents
loading

Summary of Contents for Biostar A10N-9830E

  • Page 1: Table Of Contents

    BIOS User Guide A10N-9830E / A10N-9630E BIOS Update ������������������������������������������������������������������������������������� 2 UEFI BIOS Setup �������������������������������������������������������������������������������� 6 1� Main Menu ����������������������������������������������������������������������������������� 7 2� Advanced Menu ���������������������������������������������������������������������������� 8 3� Chipset Menu �������������������������������������������������������������������������������20 4� Boot Menu �����������������������������������������������������������������������������������24 5� Security Menu ������������������������������������������������������������������������������26 6� Tweaker Menu �����������������������������������������������������������������������������29...
  • Page 2: Bios Update

    The BIOS can be updated using either of the following utilities: •  BIOSTAR BIOS-FLASHER: Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM.
  • Page 3 A10N-9830E / A10N-9630E 7. A dialog pops out after BIOS flash is completed, asking you to restart the system. Press the <Y> key to restart system. 8. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS setup.
  • Page 4 Then, the BIOS Update is completed. BIOS Update Utility (through a BIOS file) 1. Installing BIOS Update Utility from the DVD Driver. 2. Download the proper BIOS from http://www.biostar.com.tw/ 3. Launch BIOS Update Utility and click the “Update BIOS” button on the main screen.
  • Page 5 A10N-9830E / A10N-9630E 6. After the BIOS Update process is finished, click on “OK” to reboot the system. 7. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS setup. After entering the BIOS setup, please go to the <Save & Exit>, using the <Restore Defaults>...
  • Page 6: Uefi Bios Setup

    UEFI BIOS Setup Introduction The purpose of this manual is to describe the settings in the AMI UEFI BIOS Setup program on this motherboard. The Setup program allows users to modify the basic system configuration and save these settings to NVRAM. UEFI BIOS determines what a computer can do without accessing programs from a disk.
  • Page 7: 1� Main Menu

    A10N-9830E / A10N-9630E 1� Main Menu Once you enter AMI UEFI BIOS Setup Utility, the Main Menu will appear on the screen providing an overview of the basic system information. BIOS Information It shows system information including UEFI BIOS version, Project Code, Model Name, Build Date and etc.
  • Page 8: 2� Advanced Menu

    2� Advanced Menu The Advanced Menu allows you to configure the settings of CPU, Super I/O, Power Management, and other system devices. Note   » Beware of that setting inappropriate values in items of this menu may cause system to malfunction. Trusted Computing 8 | 2.
  • Page 9 A10N-9830E / A10N-9630E Security Device Support This item enables or disables BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available. Options: Enabled (Default) / Disabled SHA-1 PCR Bank This item enables or disables SHA-1 PCR Bank.
  • Page 10 ACPI Settings/WakeUp Event control Enable ACPI Auto Configuration This item enables or disables BIOS ACPI Auto Configuration. Options: Disabled (Default) / Enabled Enable Hibernation This item enables or disables system ability to Hibernate (OS/S4 Sleep State). This option may be not effective with some OS.
  • Page 11 A10N-9830E / A10N-9630E Wake system with Fixed Time This item enables or disables the system to wake on by alarm event. When this item is enabled, the system will wake on the hr::min::sec specified. Options: Disabled (Default) / Enabled Wake up date You can choose which date the system will boot up.
  • Page 12 SATA Configuration OnChip SATA function This item enables or disables OnChip SATA function. Options: Enabled (Default) / Disabled IT8613 Super IO Configuration 12 | 2. Advanced Menu...
  • Page 13 A10N-9830E / A10N-9630E Serial Port 1 Configuration Serial Port This item enabled or Disabled Serial Port (COM). Options: Enabled (Default) / Disabled Change Settings This item select an optimal settings for Super IO Device. Options: Auto (Default) / IO=3F8h; IRQ=4 / IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 / IO=2F8h;...
  • Page 14 Shutdown Temperature This item allows you to set up the CPU shutdown Temperature. Options: Disabled (Default) / 70°C/158°F / 75°C/167°F / 80°C/176°F / 85°C/185°F / 90°C/194°F CPU Configuration This item shows CPU Information. PowerNow This item enables or disables the generation of ACPI _PPC, _PSS, and _PCT objects. Options: Enabled (Default) / Disabled PSTATE Adjustment This item allows you to adjust startup P-state level.
  • Page 15 A10N-9830E / A10N-9630E PCI Subsystem Settings ABove 4G Decoding This item enables or disables 64bit capable Devices to be Decoded in Above 4G Address Space (Only if System Supports 64bit PCI Decoding). Options: Disabled (Default) / Enabled SR-IOV Support This item if system has SR-IOV capable PCIe Devices, this option enables or disables Single Root IO Virtualization Support.
  • Page 16 Network Stack Configuration Network Stack This item enables or disables UEFI network stack. Options: Disabled (Default) / Enabled Note   » The following items appear only when you set the Network Stack function to [Enabled] IPv4 PXE Support This item enables or disables IPv4 PXE Boot Support. If disabled IPv4 PXE boot option will not be created.
  • Page 17 A10N-9830E / A10N-9630E CSM Configuration CSM Support This option enables or disables CSM support. Options: Enabled (Default) / Disabled GateA20 Active Upon Request – GA20 can be disabled using BIOS services. Always – do not allow disabling GA20; this option is useful when any RT code is executed above 1MB.
  • Page 18 Other PCI device ROM priority This item for PCI devices other than Network, Mass storage or Video defines which OpROM to launch. Options: Legacy (Default) / Do not launch / UEFI NVMe Configuration The item shows NVMe controller and driver information. USB Configuration Legacy USB Support The item allows you to enable Legacy USB support.
  • Page 19 A10N-9830E / A10N-9630E XHCI Hand-off This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by XHCI driver. Options: Enabled (Default) / Disabled EHCI Hand-off This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change should be claimed by EHCI driver.
  • Page 20: 3� Chipset Menu

    3� Chipset Menu This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of the CPU itself uses when communicating with its own special components. Note  ...
  • Page 21 A10N-9830E / A10N-9630E XHCI Controller Options: Enabled (Default) / Disabled XHCI Port 0/1/2/3 Options: Enabled (Default) / Disabled EHCI HC(Bus 0 Dev 18 Fn 0) Options: Enabled (Default) / Disabled USB Internal Port 0 Options: Enabled (Default) / Disabled HUB Port 0/1/2/3...
  • Page 22 GFX Configuration IOMMU This item enables or disables IOMMU support. Options: Disabled (Default) / Enabled Remote Display Feature This item enables or disables Remote Display Feature. Options: Disabled (Default) / Enabled Gnb Hd Audio This item enables or disables Gnb Hd Audio. Options: Enabled (Default) / Disabled Primary Video Adaptor This item allows you to select Primary Video Adaptor.
  • Page 23 A10N-9830E / A10N-9630E Surround View This item support multi-display function. Options: Disabled (Default) / Enabled 3. Chipset Menu | 23...
  • Page 24: 4� Boot Menu

    4� Boot Menu This menu allows you to setup the system boot options. Setup Prompt Timeout This item sets number of seconds to wait for setup activation key. Options: 2 (Default) Bootup NumLock State This item selects the keyboard NumLock state. Options: On (Default) / Off Full Screen Logo Display This item allows you to enable/disable Full Screen Logo Show function.
  • Page 25 A10N-9830E / A10N-9630E USB Support If Disabled, all USB devices will NOT be available until after OS boot. If Partial Initial, USB Mass Storage and specific USB port/device will NOT be available before OS boot. If Enabled, all USB devices will be available in OS and Post.
  • Page 26: 5� Security Menu

    5� Security Menu Administrator Password This item sets Administrator Password. User Password This item sets User Password. Secure Boot Menu 26 | 5. Security Menu...
  • Page 27 A10N-9830E / A10N-9630E Secure Boot Secure Boot feature is active if Secure Boot is enabled, Platform Key(PK) is enrolled and the system is in user mode. The mode change requires platform reset. Options: Disabled (Default) / Enabled Secure Boot Customization Secure Boot mode options : Standard or Custom.
  • Page 28 Remove ‘UEFI CA’ from DB Device Guard ready system must not list ‘Microsoft UEFI CA’ Certificate in Authorized Signature database(db). Restore DB defaults Restore DB variable to factory defaults. Platform Key (PK) Options: Details / Export / Update / Delete Key Exchange Keys Options: Details / Export / Update / Append / Delete Authorized Signatures...
  • Page 29: 6� Tweaker Menu

    A10N-9830E / A10N-9630E 6� Tweaker Menu This submenu allows you to change voltage and clock of various devices. Note   » We suggest you use the default setting. Changing the voltage and clock improperly may damage the device.   » The options and default settings might be different by RAM or CPU models.
  • Page 30 Memory Configuration Memory Clock This item allows you to select different Memory Clock. Options: Auto (Default) Bank Interleaving This item enables or disables Bank Interleaving. Options: Enabled (Default) / Disabled Channel Interleaving This item enables or disables Channel Interleaving. Options: Enabled (Default) / Disabled Memory Clear This item enables or disables Memory Clear function.
  • Page 31 A10N-9830E / A10N-9630E Memory Insight DIMM Profile These items display memory information. 6. Tweaker Menu | 31...
  • Page 32: 7� Save & Exit Menu

    7� Save & Exit Menu This menu allows you to load the optimal default settings, and save or discard the changes to the BIOS items. Discard Changes and Exit Abandon all changes made during the current session and exit setup. Save Changes and Reset Reset the system after saving the changes.

This manual is also suitable for:

A10n-9630e

Table of Contents