Advertisement
Before Starting
In this chapter, we'll create the settings we want from the default settings of the instrument. Before starting,
initialize the Registration Memory by following the steps on page 28. After initialization is complete, set the
volume of each Voice section to 0.
M 1
Classical Sound
The setting here is one of the most recognizable and representative settings of classical pipe organs, which have a
wide and rich sonic range.
Imagine that you are in a large concert hall or a stone cathedral — one that has both a majestic pipe organ high
above the floor and a small organ near the audience.
Adjusting the Reverb Settings
1
Press the top of the REVERB button on the panel to set the depth to 24.
REVERB
MAX
MIN
64
Playing the ELS-01/01C — Tutorial
Advertisement
