Download Print this page

Adjusting The Reverb Settings - Yamaha ELS-01/01C Playing Manual

Yamaha electone owner's manual

Advertisement

M 1
Intro with Acoustic Guitar and Electric Piano
The main part of the Intro is the Acoustic Guitar and Electric Piano in the Lower Keyboard. In fact, the Electric
Piano for Lower Keyboard Voice 2 is used throughout the song, contained in Registrations M1 – M7.

Adjusting the Reverb Settings

1
Press one of the REVERB buttons on the panel to call up the Reverb Display, and set
the Depth to 20.
REVERB
MAX
MIN
2
Press the [2] button at the top right of the display, then set the Type to [STAGE 1].
Pressing the TYPE button calls up the Effect Type list. Select [STAGE 1] from the list, then press the
[CLOSE] button to close the list.
This setting reproduces the intimate atmosphere of hearing a live performance on a small stage, instead of a
large hall.
NOTE
The sliders in Page 3 of the Reverb display are the same as the Reverb slider in the Voice Condition
display of each Voice section. In these instructions, we'll adjust the reverb for each Voice section by
using the Reverb Slider in the Voice Condition display, not the Reverb display.
Playing the ELS-01/01C — Tutorial
29

Advertisement

loading

This manual is also suitable for:

Electone stagea els-01cElectone stagea els-01Els-01x