Advertisement
3
Set the BRILLIANCE button (at the right of the Voice buttons), to the third position from
the top.
4
Make the appropriate Voice Condition settings for Rock Organ 1.
Pressing the [ORGAN] button on the panel again calls up the Voice Condition display. On Page 1 of the
display, set After Touch in Touch Tone to 0, and Reverb to 16.
On Page 2 of the display, set Tune to +4. (Use the Data Control dial, if necessary.) This detunes the sound
slightly and gives it a bit of tension.
NOTE
There are two ways to call up the Voice Condition display: pressing the same Voice button on the
panel again, or pressing the selected Voice button in the Voice Menu in the display. In these
instructions, we've used the first method.
NOTE
The VOLUME buttons on the panel let you make broad settings to the volume, while the VOLUME
slider in the Voice Condition display lets you make fine adjustments.
UPPER KEYBOARD VOICE 1
STRINGS
BRASS
WOOD-
TUTTI
WIND
PIANO
ORGAN
PERCUS-
GUITAR
CHOIR
SION
BRILLIANCE
VOLUME
BRILLIANT
MAX
PAD
SYNTH
1
WORLD
2
MELLOW
MIN
Playing the ELS-01/01C — Tutorial
31
Advertisement
