Selecting From Voice Condition; Initial Touch; Feet - Yamaha Electone EL-100 Owner's Manual

1
Selecting from Voice
Condition Pages
To call up the Voice Condition Pages:
Choose a voice on the panel, then press that voice's panel button again. The
Voice Condition Choose a voice on page appears on the LCD display.
3
Each voice group's Voice Condition (except for Lead Voice) is configured with
four pages. Voice Condition of the Lead Voice consists of five pages.
Voice Condition [PAGE 1]
DATA CONTROL
The included items are different between Pedal Voice group and the others
(Only Feet setting is available with Pedal Voice group).

1 Initial Touch

Controls volume and timbre according to the velocity at which you strike the
keys.
The harder you strike the keys, the greater the volume and the brighter the
timbre will become. All voices are provided with this expressive function,
making it possible to perfectly reproduce the subtle dynamic and tonal changes
of actual instruments.
Higher settings make the change wider.
Range: 0 - 14

2 Feet

Determines the octave setting of the voice group. You can use a certain voice in
the broader range.
PRESET is the original (factory) setting; 4' is the highest and 16' is the lowest.
2' setting is added to the Pedal Voice sections.
30
LEAD VOICE
VIOLIN FLUTE
OBOE TRUM- TO
PET LOWER
1
INIT.T: 8
FEET:PRESET
MAX
MIN
DATA CONTROL
Î ⁄
2
Pedalboard
∏1⁄
FEET:PRESET
NOTE:
Minimum setting produces no effect at all.