Song Job Mode; Tempo, Repeat Playback; Program Change, Bank Select - Yamaha DTXPRESS Owner's Manual

Song Job Mode

This function edits the User Song (No. 97-128) that is
currently selected.
■ Entering the Song Job Mode
Press the [SONG] button on the front panel.
Once the Song Jobe Mode is entered, the main page (Tempo, Re-
peat Playback) shown below will be displayed.
SONG
ƒ=120 Repeat=off
* Double-click the [SONG] button to enter the Song Job Mode
and the [8. Clear Song] display will appear.
■ What's in the Song Job Mode
The Song Job Mode is divided into the following 9 pages.

1. Tempo, Repeat Playback ..................................... 48

2. Program Change, Bank Select ............................ 48

3. Volume, Pan ......................................................... 49
4. Song Copy ........................................................... 49
5. Quantize ............................................................... 49
6. Clear Track ........................................................... 50
7. Merge Track ......................................................... 50
8. Clear Song ........................................................... 50
9. Song Name .......................................................... 50
Procedure
1. Before editing, it is necessary to select the User Song
(No. 97-128) you want to edit in the Drum Kit Play Mode's
[Drum Kit & Song] display or [Song & Mute] display.
2. Press the [SONG] button to enter the Song Job Mode.
* If the [SONG] button is pressed when a preset song is al-
ready selected, "ERROR Preset Data" will appear and the
Song Job Mode cannot be entered.
3. Use the [PAGEs]/[PAGEt] buttons to display the page
you want to edit.
* If the Utility Mode's [1-4. Jump To Recent Page] (P. 52) pa-
rameter is set to "on", The DTXPRESS will display the page
last edited when entering the Song Job Mode.
4. Use the [SEL<]/[SEL>] buttons to move the cursor to
the parameter you want to edit. The parameter will flash.
* If there is only one parameter, it is not necessary to move the
cursor.
5. Use the [VALUE–]/[VALUE+] buttons to set the
parameter's value or ON/OFF setting.
Any settings made in the Song Job Mode will directly
change the settings in the memory of the DTXPRESS. It is
not necessary to use the Store Operation.
48
1. Tempo, Repeat Playback
This function changes the tempo (rewrites the tempo information
in the song's header) and sets the repeat playback of the user song.
SONG
ƒ=120 Repeat=off
q
q q (Tempo)
[Range] 30-300
w Repeat (Repeat Playback)
[Range] off, on
If this is set to "on", the user song will repeat playback.
If this is set to "off", the user song will play normally.
2. Program Change, Bank Select
This function changes the voices that will be used for each MIDI
channel in the user song (rewrites the voice information in the
song's header). This program change will be transmitted when a
song is selected and when song playback is stopped.
SONG Ch 1=off
PCNo=--- V=-----
e
q MIDI Channel
[Range] Ch1-Ch16
w Program Change Transmit On/Off
on: Transmits.
off: Does not transmit.
e PCNo (Program Change Number)
[Range] 1-128
r V (Bank Select)
[Range] meldy, drumV
Sets the bank that will be switched.
meldy: Transmits the melody voice program change (MSB=0).
drumV: Transmits the drum voice program change (MSB=127).
w
q w
r