Note:
Make sure you place the long edge of the slide in the film holder as shown above.
3. Make sure you removed the document mat. See "Removing the Document Mat" on page 22.
4. Close the scanner cover.
To scan your slides, see "Starting Epson Scan" on page 34.
When you are finished scanning slides, be sure to replace the document mat before scanning
documents or photos. See "Replacing the Document Mat" on page 33.
Replacing the Document Mat
Replace the document mat by sliding it into the notches in the scanner cover. Make sure the white
surface faces outwards.
Perfection V600 Photo
Placing Originals on the Scanner
User's Guide
33