Replacing The Scanner Light Source; Power Off Timer Setting - Epson Perfection V600 Photo User Manual

6. Remove the document mat and clean the transparency unit window as described in step 4.
a. transparency unit window
Make sure that no dust builds up on the surface of the document table or the transparency unit
window. Dust can cause spots in your scanned images.

Replacing the Scanner Light Source

The luminosity of the scanner light source declines over time. If the light source breaks or becomes too
dim to operate normally, the scanner stops working and the Status light rapidly flashes. When this
happens, the light source assembly must be replaced by a professional. For details, contact your dealer.
See "Contacting Epson Support" on page 149 for more information.

Power Off Timer Setting

The product turns off automatically if no operations are performed for the selected period. You can
adjust the time before power management is applied. Any increase will affect the product's energy
efficiency. Please consider the environment before making any change.
Perfection V600 Photo
Maintenance
User's Guide
133