Master Layer Channels - Yamaha DM 2000 Owner's Manual

Master Layer Channels

When the Master Layer is selected in the Master Section, the Bus Outs, Aux Sends, and
Matrix Sends can be selected. A Bus Out is shown below. Aux Sends and Matrix Sends
appear the same except that they do not have a STEREO button.
A
STEREO button (Bus Out only)
This button is used to route the Bus Out to the Stereo Out.
B
INSERT button
This button is used to turn on and off the Bus Out's Insert.
1
C
COMP button
This button is used to turn on and off the Bus Out's Compressor.
D
Compressor curve display
2
This display shows the Compressor's curve.
E
EQ button
This button is used to turn on and off the Bus Out's 4-band Para-
C metric Equalizer.
F
EQ curve display
D
This display shows the Equalizer's curve, which can be set by
5
dragging.
6
G
DELAY button
7
This button is used to turn on and off the Bus Out's Delay func-
8
tion.
I
H
Delay time
This parameter is used to set the delay time of the Delay func-
tion. Delay times can be set by dragging.
I
Channel number
Displays the Channel number of the channel.
J
AUTO button
This button is not used in Version 1.0 of Studio Manager for
DM2000.
K
SELECT button
This button is used to select the Bus Out.
L
SOLO button
J
K This button solos the Bus Out and is colored orange when the
L
channel is soloed.
M
M
ON button
N
This button turns the Bus Out on and off. It is colored orange
when the channel is turned on.
O
N
Short Channel name
This is the channel's Short Channel name, which can be edited.
To edit the name, click it and type.
O
Channel Fader
This control is used to set the level of the Bus Out.
P
Channel Meter
P
This meter displays the signal level of the Bus Out.
Master Layer Channels
Studio Manager—Owner's Manual
20