Yamaha DM 2000 Owner's Manual page 10

7
Chapter 1—Getting Started
Installing on a Windows XP system
Turn on your PC.
1
2 Click Start, Control Panel.
If the Control Panel is displayed as shown, click "Switch to classic view" in the upper left of
the window. All control panels and icons are displayed.
Select System, Hardware, Driver signatures, Driver signature options, select
3
"Ignore—Install software without asking for confirmation," and click OK.
Click OK to close System Properties, and then click
4
ner of the window to close the Control Panel.
Insert the included CD-ROM into your CD-ROM or DVD-ROM drive.
5
6 Turn off the DM2000 and use a USB cable to connect the USB port of the
computer (or the USB hub) to the TO HOST USB port of the DM2000.
Turn on the DM2000.
7
The Found New Hardware Wizard window appears.
Select "Install software automatically (recommended) (I)," and click Next.
8
When the installation is complete the message, "Completing the Found New Hardware
Wizard" is displayed.
Note: It may take up to ten seconds for this window to appear.
Click Finish.
9
10 Restart the computer.
The driver is installed.
Card Filer
If you install Card Filer, you can manage DM2000 data stored on SmartMedia cards.
Double-click the "Card_" folder.
1
The folder opens and various files including "Setup.exe" are displayed.
Double-click "Setup.exe."
2
The YAMAHA Card Filer setup dialog appears.
Studio Manager—Owner's Manual
in the upper right cor-