Appendix; Initialize - Yamaha DD-55 Owner's Manual

Appendix

Initialize.....................................................................................

The DD-55's Custom Song, Custom Kit, and Panel Setting data are backed up so long
as power is supplied to the DD-55 by means of batteries or an AC adaptor.
Initialize is the term which refers to this data being restored to its original factory set-
tings. To initialize the DD-55, follow the procedure below.
• Keep in mind that initializing the data erases any and all of the original data you
saved to the instrument.
q
Turn the power off. (Move the [STANDBY/ON] switch to the
STANDBY position.)
w
While holding down the [DEMO] button, turn the power on again.
(Move the [STANDBY/ON] switch to the ON position.)
The DD-55 will be initialized to its factory settings. "C|r" will
appear in the display when the initialization process is complete.
The following data will remain in memory, as long as batteries are
installed or an AC adaptor is connected, even if the power is turned
off.
• Custom Song
• Custom Kit
• Auto Kit Selection
• MIDI Transmit Channel for the PAD
• MIDI Transmit Note for the PAD
• Pad Sensitivity
C|r
31