Setting The Registration Sequence, Freeze, And Voice Set; Specifying The Order For Calling Up Registration Memory Presets - Registration Sequence; Maintaining Panel Settings - Freeze - Yamaha Clavinova CVP-208 Owner's Manual

Setting the Registration Sequence, Freeze, and Voice Set

The explanations here apply to step #3 of the procedure on page 136.
Specifying the Order for Calling Up Registration Memory Presets —
Registration Sequence
You can save your custom panel settings to the Registration Memory presets, and call them up by pressing the
appropriate REGISTRATION MEMORY buttons [1] - [8]. The convenient Registration Sequence function lets you call up
the presets in any order you specify, by simply using the [BACK]/[NEXT] buttons or the pedal as you play.
Determines which pedal is used to advance
(increment) through the sequence.
Determines which
pedal is used to A
reverse (decrement)
B
through the sequence.
C
D
E
Determines how Registration
Sequence behaves when
reaching the end of the
sequence.
Stop
Pressing the [NEXT] button or
the "advance" pedal has no
effect. The sequence is
"stopped."
Top
The sequence starts again at
the beginning.
Next Bank
The sequence automatically
moves to the beginning of the
next Registration Memory bank
in the same folder.
Indicates the Registration Memory preset
numbers, in the order of the current
Registration Sequence.
These move the cursor position in the sequence.
Replaces the number at the cursor position with the
currently selected Registration Memory number.
E
Execute the settings by pressing the [EXIT] button.
ND
Maintaining Panel Settings — Freeze
This lets you specify the settings you want to be maintained or left unchanged, even when changing Registration
Memory presets. For details, see page 90.
Making Global and Other Important Settings — Function
Indicates the file name of the selected
Registration Memory bank.
1 2 3 4 5 6
Inserts the number of the currently
selected Registration Memory preset
immediately before the cursor position.
F
G
H
I
J
Turns the Registration
Sequence function
on/off. When this is
set to "ON," the
programmed
Registration
7 8
Sequence is shown at
the top right of the
Main display, and you
can step through the
sequence in this
display by using the
[BACK]/[NEXT]
buttons or the pedals.
Deletes all Registration
Memory numbers in the
sequence.
Deletes the number at the
cursor position.
Registration Sequence data is included as part
of the Registration Memory bank file. To save
your newly programmed Registration Sequence,
store the current Registration Memory bank file
(page 39, 48). Any Registration Sequence data
is lost when changing Registration Memory
banks, unless you've stored it with the Registra-
tion Memory bank file.
When you are using the
pedal to call up specified
presets, you can easily reset
the Registration Sequence
and go back to the first entry
by holding down the pedal
for a few seconds (the red
box indicator at the top right
of the MAIN display goes
out). Press and release the
foot pedal to re-select the
first entry in the sequence.
n
Setting Registration
Sequence Enable to "ON"
overrides any other Pedal
settings (for pedals assigned
to "Regist (+) Pedal" and
"Regist (-) Pedal" here).
These include the pedal set-
tings on page 142, and in
Voice Set on page 146.
n
When both "Regist (+)
Pedal" and "Regist (-) Pedal"
are set to "OFF," the pedals
cannot be used to step
through the Registration
Sequence; only the [BACK]/
[NEXT] buttons can be used
in the MAIN display.
n
When both "Regist (+)
Pedal" and "Regist (-) Pedal"
are set to the same pedal,
"Regist (+) Pedal" takes
priority.
CVP-210/208 145