AT&T MLS-34D Manual page 6

Equipment Feature
Message Light On
Turns on the message light on an MLS- or
MLC- model phone.
Message Light Off
Turns off the message light on an MLS-
or MLC-model phone.
Call Forwarding
Forwards calls from your extension to a
destination extension. Programming this
feature on a button with lights will let you see
at a glance if your calls have been
forwarded. Unless Do Not Disturb is on,
phone will beep once each time a call is
forwarded. (To cancel Call Forwarding, enter
your own extension jack number as the
destination.)
Direct Line Pickup
Lets you access a ringing, held, or active
call on a line not assigned to your phone.
Call Pickup
Lets you answer a call ringing at a
specific extension.
* The features shown on this page require extension jack numbers or line jack numbers. See your
System Manager for a list of those numbers.
Equipment Feature Using
Intercom
To Dial
Manually
Dial [ ] [ ] [
Feature 0
+ Ext. Jack Number
Dial [ ] [ ] [
Feature 1
+ Ext. Jack Number
Dial [ ] [ ] [
Feature 1
+ Your Ext. Jack Number
+ Destination Ext. Jack
Number
Dial [ ] [ ] [
Intercom 6
+ two-digit line jack
number (01-24)
Dial [ ] [ ]
Intercom 6
+ Ext. Jack Number
6
To Use On
a Button
]
Press the button +
9
Ext. Jack Number
]
Press the button +
0
Ext. Jack Number
]
Press the button +
1
Your Ext. Jack
Number +
Destination Ext.
Jack Number
Press the button, then
]
8
dial the two-digit line
jack number (01-24)
Press the button