Table of Contents
Advertisement
Installation Guide
1.1 Installation Equipment Requirements
This section lists everything that must be in place or available to perform the installation. This includes the
equipment and components that are included in the packaging.
Table 1: Equipment and Components Included
Category
Components
Screws
Cables
Table 2: Additional Equipment Needed
T15 Torx Screwdriver
T15 Torx Screwdriver w/ Torque Measuring
Capability
Level
Lift Equipment
ESD Mitigation Equipment (site specific)
Table 3: Torque Specifications for Screws
Screw Type
M5 x 12mm T15 Torx screws w/
washers
M5 x 10mm T15 Torx screws
1.2 Installation Safety
Item
E3000 Chassis w/ PSUs,
Fans, and BMC Pre-installed
Rack-mounting Rails
w/ mounting hardware
F3100
Device Blanks
M5 x 12mm T15 Torx Pan
Head screws w/ washers
M5 x 10mm T15 Torx Flat
Head screws w/ washers
3m, C14 - C15 Power Cables
Equipment
1.1 Installation Equipment Requirements
# Included
1 set of 2
1 - 10 depending on configuration
0 - 9 depending on configuration
6
6
2
Required or Recommended?
Required
Recommended
Recommended
Recommended
Required
Torque Value
3.38-3.61 Nm / 30-32 in-lbf
3.38-3.61 Nm / 30-32 in-lbf
1. Installation
1
2
Advertisement
Table of Contents
