Table of Contents
Advertisement
2. Safety
Installation Guide
2.8 Safety Warnings and Cautions
All maintenance and service actions appropriate to the end-users are described in the product
documentation. All other servicing should be referred to an Western Digital-authorized service technician.
To avoid shock hazard, turn off power to the unit by unplugging both power cords before servicing the unit.
Use extreme caution around the chassis because potentially harmful voltages are present.
When replacing a hot-plug power supply, unplug the power cord to the power supply being replaced
before removing it from the OpenFlex F3100 and E3000 .
The power supply in this product contains no user-serviceable parts. Do not open the power supply.
Hazardous voltage, current and energy levels are present inside the power supply. Return to manufacturer
for servicing.
Use caution when accessing part of the product that are labeled as potential
shock hazards, hazardous access to moving parts such as fan blades.
2.8 Safety Warnings and Cautions
To avoid personal injury or property damage, before you begin installing the product, read, observe, and
adhere to all of the following safety instructions and information. The following safety symbols may be used
throughout the documentation and may be marked on the product and/or the product packaging.
CAUTION: Indicates the presence of a hazard that may cause minor personal injury or property damage if
the CAUTION is ignored.
WARNING: Indicates the presence of a hazard that may result in serious personal injury if the WARNING is
ignored.
Indicates potential hazard if indicated information is ignored.
Indicates shock hazards that result in serious injury or death if safety instructions are not followed.
Indicates do not touch fan blades, may result in injury.
Indicates disconnect all power sources before servicing.
34
Advertisement
Table of Contents
