Input Jack - Yamaha Magicstomp Bass Effects Processor Owner's Manual

q Display
Displays information for the currently selected patch or operating conditions of the MAGICSTOMP.
w CONTROL Knobs
These are used to control patch parameters. (→ page 14)
e VOLUME Knob
Controls the overall output volume of the MAGICSTOMP. (→ page 12)
r STORE/EXIT Button
This button is used to store edited patches in the MAGICSTOMP (→ page 18), exit the Deep Edit
Mode (→ page 15), or Name Edit Mode (→ page 20).
t – Switch, + Switch, ON/OFF Switch
These switches select patches, switch the patch ON or OFF, or switch modes. (→ page 12, 13, 20,
22)
y INPUT Jack
For connecting an instrument such as a bass guitar, synthesizer, etc., to the MAGICSTOMP. (→ page
11)
u INPUT LEVEL HIGH/LOW Switch
Selects HIGH or LOW impedance to match the input level with the output level of the instrument
connected to the INPUT jack. (→ page 11)
i OUTPUT L/MONO, R Jacks
For connecting the MAGICSTOMP to a bass amplifier, recorder, PA mixer, etc. (→ page 11)
o USB Jack
For connecting the MAGICSTOMP to a computer. This lets you edit patch voices on the computer or
move patch data between the computer and the MAGICSTOMP. (→ page 27)
!0 AC IN Jack (Power Adaptor)
Connect the power adaptor to this jack. (→ page 10)
* Power is switched ON when the power adaptor is connected (and supplying power) to the main unit.
!1 PHONES Jack
A pair of headphones connected to this jack (stereo mini) let's you practice or edit patches while
monitoring the MAGICSTOMP's sound output through the headphones. Use the Volume Knob
adjust the volume.
* Output is still delivered from the OUTPUT jack
Component Names & Functions
i
when a pair of headphones is connected to the PHONES jack.
e
to
9