Using The Global Paste Function - Yamaha DSP5D Owner's Manual

Using the Global Paste function

"Global Paste" is a function that lets you copy and paste settings of the desired channel or parameter from the current scene to
scene data in memory (multiple selections are allowed). This is a convenient way in which changes to the current scene can be
applied to scenes that have already been stored.
1 In the DISPLAY ACCESS section, press the
[SCENE] key several times to access the GLO-
BAL PASTE screen shown below.
In this screen you can select the copy-source channels/
parameters and specify the paste-destination scene
data.
CURRENT SCENE area
PASTE MODE area
2 Use the buttons in the PASTE MODE area to
select one of the following as the type of item
you want to paste.
INPUT Input channel parameters
OUTPUT Output channel parameters
DCA level or mute on/off status,
DCA, GEQ, EFFECT
GEQ settings, internal effect settings
3 In the CURRENT SCENE area, select the copy-
source channels or parameters.
The contents shown in the CURRENT SCENE area
will depend on what you select in the PASTE MODE
area.
DESTINATION SCENE area
PASTE button
GLOBAL PASTE
PM5D/PM5D-RH V2 / DSP5D Owner's Manual
• When PASTE MODE = INPUT
Select input channels in the left area, and select param-
eters in the right area. (For details on the parameters
➥ p.187).
• When PASTE MODE = OUTPUT
Select output channels in the left area, and select
parameters in the right area. (For details on the param-
eters ➥ p.187).
Operating section
10
97