Meters; Items In The Meter Section; Switching The Meter Display - Yamaha DSP5D Owner's Manual

13

Meters

13 Meters
This chapter explains meter-related operations.

Items in the meter section

The meter section shows the input levels of the input channels and the output levels of the output channels.
1 2 3 4 5 6 7 8 9 10
OVER
-3
-6
-9
-12
-15
-18
-24
-30
-40
-50
-60
1 L 1R 2L 2R 3L 3R 4L 4R
1 2 3 4 5 6 7
OVER
-3
-6
-9
-12
-15
-18
-24
-30
-40
-50
-60
ST IN / / MATRIX
6

Switching the meter display

You can use the keys of the meter section to specify the
channels whose levels will be shown in the INPUT/MIX
meters and ST IN/MATRIX meters. The following chan-
nels correspond to each key.
Key
[CH 1-24/ST IN/FX Input channels
RTN] key
[CH 25-48/FX RTN/ Input channels
ST IN] key
[MIX/MATRIX] key
108
PM5D/PM5D-RH V2 / DSP5D Owner's Manual
1
1 1 12 13 14 15 16 17 18 19 20 21 22 23 24
MIX
CH 1-24
ST IN/ MATRIX
PEAK
HOLD
/ST IN
2 3 4 5
8 L R L R L R
OVER OVER
-3 -3
-6 -6
-9 -9
-12 -12
-15 -15
-18 -18
-24 -24
-30 -30
-40 -40
-50 -50
-60 -60
STEREO A STEREO B CUE
7
[INPUT/MIX] [ST IN/MATRIX]
meters meters
ST channels
(or FX RTN channels)
1–24
1–4
FX RTN channels
(or ST IN channels)
25–48
1–4
MIX channels MATRIX channels
1–24 1–8
A INPUT/MIX meters
Depending on the key you press, these meters indicate
the input levels of input channels 1–24 or 25–48, or the
output levels of MIX channels 1–24.
OVER
B [CH 1-24/ST IN/FX RTN] key
-3
-6
-9
-12
-15
When this key is on, the INPUT/MIX meters indicate
-18
-24
-30
-40 the input levels of input channels 1–24 and the ST IN/
-50
-60
FX RTN/MATRIX meters indicate the output level of
ST IN channels (or FX RTN channels, depending on
the FOLLOW INPUT LAYER setting) 1–4.
C [CH 25-48/FX RTN/ST IN] key
When this key is on, the INPUT/MIX meters indicate
the input levels of input channels 25–48 and the ST IN/
FX RTN/MATRIX meters indicate the output level of
FX RTN channels (or ST IN channels, depending on
the FOLLOW INPUT LAYER setting) 1–4.
D [MIX/MASTER] key
When this key is on, the INPUT/MIX meters indicate
the output levels of MIX channels 1–24 and the ST IN/
FX RTN/MATRIX meters indicate the output levels of
MATRIX channels 1–8.
E [PEAK HOLD] key
OVER
-3
Switches the peak hold function on/off for the meter
-6
-9
-12
display.
-15
-18
-24
-30
F ST IN/FX RTN/MATRIX meters
-40
-50
-60
Depending on the key you press, these meters indicate
the output levels of ST IN channels 1–4 or MATRIX
channels 1–8.
G MASTER meters
These meters always indicate the output levels of the
STEREO A/B channels and CUE bus.
Hint
• The type of channels shown in the meter section is also
shown in the METER SECTION area in the upper right of
the display.
• The MASTER meters always indicate the output levels of
the STEREO A/B channels and CUE bus.
Operating section