Delay Lcr - Yamaha 006IPTO-F0 Owner's Manual

MOD. DELAY
One input, two output basic repeat delay with mod-
ulation.
Parameter Range
DELAY 0.0–2725.0 ms
FB. GAIN –99 to +99%
HI. RATIO 0.1–1.0
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
WAVE Sine, Tri
THRU,
HPF
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
LPF
THRU
SYNC OFF, ON
1
DLY.NOTE
2
MOD.NOTE
1.
Maximum value depends on the tempo setting)
2.

DELAY LCR

One input, two output 3-tap delay (left, center,
right).
Range
Parameter
DELAY L 0.0–2730.0 ms Left channel delay time
DELAY C 0.0–2730.0 ms Center channel delay time
DELAY R 0.0–2730.0 ms Right channel delay time
FB. DLY 0.0–2730.0 ms Feedback delay time
LEVEL L –100 to +100% Left channel delay level
LEVEL C –100 to +100% Center channel delay level
LEVEL R –100 to +100% Right channel delay level
Feedback gain (plus values for
normal-phase feedback, minus
FB. GAIN –99 to +99%
values for reverse-phase feed-
back)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
THRU,
HPF High-pass filter cutoff frequency
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
LPF Low-pass filter cutoff frequency
THRU
SYNC OFF, ON Tempo parameter sync on/off
Used in conjunction with
1
NOTE L
TEMPO to determine DELAY L
Used in conjunction with
NOTE C 1
TEMPO to determine DELAY C
Used in conjunction with
NOTE R
1
TEMPO to determine DELAY R
Used in conjunction with
NOTE FB
1
TEMPO to determine FB. DLY
1.
Maximum value depends on the tempo setting)
Description
Delay time
Feedback gain (plus values for
normal-phase feedback, minus
values for reverse-phase feed-
back)
High-frequency feedback ratio
Modulation speed
Modulation depth
Modulation waveform
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Tempo parameter sync on/off
Used in conjunction with
TEMPO to determine DELAY
Used in conjunction with
TEMPO to determine FREQ
(
Description
(
Effects Parameters
ECHO
Two input, two output stereo delay with crossed
feedback loop.
Parameter Range
DELAY L 0.0–1350.0 ms Left channel delay time
DELAY R 0.0–1350.0 ms Right channel delay time
FB.DLY L 0.0–1350.0 ms Left channel feedback delay time
Right channel feedback delay
FB.DLY R 0.0–1350.0 ms
time
Left channel feedback gain (plus
values for normal-phase feed-
FB. G L –99 to +99%
back, minus values for
reverse-phase feedback)
Right channel feedback gain
(plus values for normal-phase
FB. G R –99 to +99%
feedback, minus values for
reverse-phase feedback)
Left to right channel feedback
gain (plus values for nor-
L->R FBG –99 to +99%
mal-phase feedback, minus val-
ues for reverse-phase feedback)
Right to left channel feedback
gain (plus values for nor-
R->L FBG –99 to +99%
mal-phase feedback, minus val-
ues for reverse-phase feedback)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
THRU,
HPF High-pass filter cutoff frequency
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
LPF Low-pass filter cutoff frequency
THRU
SYNC OFF, ON Tempo parameter sync on/off
Used in conjunction with
1
NOTE L
TEMPO to determine DELAY L
Used in conjunction with
NOTE R 1
TEMPO to determine DELAY R
Used in conjunction with
NOTE FBL 1
TEMPO to determine FB.DLY L
Used in conjunction with
NOTE FBR
1
TEMPO to determine FB.DLY R
1.
(Maximum value depends on the tempo setting)
CHORUS
Two input, two output chorus effect.
Parameter Range
FREQ. 0.05–40.00 Hz Modulation speed
AM DEPTH 0–100% Amplitude modulation depth
PM DEPTH 0–100% Pitch modulation depth
MOD. DLY 0.0–500.0 ms Modulation delay time
WAVE Sine, Tri Modulation waveform
LSH F 21.2 Hz–8.00 kHz Low shelving filter frequency
LSH G –12.0 to +12.0 dB Low shelving filter gain
EQ F 100 Hz–8.00 kHz EQ (peaking type) frequency
EQ G –12.0 to +12.0 dB EQ (peaking type) gain
EQ Q 10.0–0.10 EQ (peaking type) bandwidth
HSH F 50.0 Hz–16.0 kHz High shelving filter frequency
HSH G –12.0 to +12.0 dB High shelving filter gain
SYNC OFF, ON Tempo parameter sync on/off
Used in conjunction with
1
NOTE
TEMPO to determine FREQ.
1.
DM1000 Version 2—Owner's Manual
311
Description
Description