1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11191]
PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a license plate light
bulb
1. Remove the holding plate by re-
moving the bolts.
1
1. Holding plate
2. Bolt
2. Remove the license plate light lens
by removing the bolts.
EAU46780
2
1. Bolt
1
1. License plate light bulb socket
2. License plate light bulb
3. License plate light lens
7-38
3. Remove the license plate light
socket (together with the bulb) by
turning it counterclockwise, and
then pulling it out.
1
2
2
1
3
4
5
6
3
7
8
9