INSTRUMENT AND CONTROL FUNCTIONS
Adjusting the front fork
WARNING
Always adjust both fork legs equal-
1
ly, otherwise poor handling and loss
of stability may result.
2
This front fork is equipped with spring
preload adjusting bolts, rebound damp-
3
ing force adjusting knobs and compres-
sion damping force adjusting screws.
4
NOTICE
To avoid damaging the mechanism,
5
do not attempt to turn beyond the
maximum or minimum settings.
6
7
8
9
EAU14732
Spring preload
EWA10180
(a)
1. Spring preload adjusting bolt
ECA10101
To increase the spring preload and
thereby harden the suspension, turn
the adjusting bolt on each fork leg in di-
rection (a). To decrease the spring pre-
load
and
thereby
suspension, turn the adjusting bolt on
each fork leg in direction (b).
Align the appropriate groove on the ad-
justing mechanism with the top of the
front fork cap bolt.
1
(b)
1. Current setting
2. Front fork cap bolt
soften
the
4-22
1
2
Spring preload setting:
Minimum (soft):
5
Standard:
4
Maximum (hard):
1
1
3 2
5 4