Replacing A Tail/Brake Light Bulb - Yamaha FJR1300 Owner's Manual

1. Headlight bulb holder
3. Unhook the headlight bulb holder,
and then remove the defective
bulb.
WARNING
_
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
_
4. Place a new bulb into position, and
then secure it with the bulb holder.
PERIODIC MAINTENANCE AND MINOR REPAIR
CAUTION:
_
Take care not to damage the follow-
ing parts:
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosi-
ty of the bulb, and the bulb life
will be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
EW000119
cohol or thinner.
Headlight lens
• Do not affix any type of tinted
film or stickers to the head-
light lens.
• Do not use a headlight bulb of
a wattage higher than speci-
fied.
_
5. Install the bulb cover, and then
connect the coupler.
6. Install the panel.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
EC000104
1. Socket
Replacing a tail/brake light
bulb
1. Remove the passenger seat. (See
2. Remove the socket (together with
3. Remove the defective bulb by
4. Insert a new bulb into the socket,
5. Install the socket (together with
6. Install the passenger seat.
6-32
page 3-10 for passenger seat re-
moval and installation procedures.)
the bulb) by turning it counter-
clockwise.
turning it counterclockwise.
and then turn it clockwise until it
stops.
the bulb) by turning it clockwise.
EAU04000
6