Checking The Coolant Level - Yamaha FJR1300 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Recommended final gear oil:
Shaft drive gear oil
(Part No.: 9079E-SH001-00)
Oil quantity:
0.2 L
5. Install and tighten the filler bolt.
6. Check the final gear case for oil
leakage. If oil is leaking, check for
the cause.
6

Checking the coolant level

The coolant level should be checked as
follows before each ride. In addition,
the coolant must be changed at the in-
tervals specified in the periodic mainte-
nance and lubrication chart.
1. Place the motorcycle on a level
surface and hold it in an upright
position.
NOTE:
_
The coolant level must be checked
on a cold engine since the level
varies with engine temperature.
Make sure that the motorcycle is
positioned straight
checking the coolant level. A slight
tilt to the side can result in a false
reading.
_
6-13
EAU04044
1. Maximum level mark
2. Minimum level mark
2. Check the coolant level in the
coolant reservoir.
NOTE:
_
The coolant should be between the
minimum and maximum level marks.
up when
_