IBM Aspera HST Admin Manual page 70

<validation_timeout>300</validation_timeout>
Transfer Validation Timeout -->
</central_server>
3. Edit settings as needed.
Central Server Settings Reference
Setting Description
Address The network interface address on which the transfer
server listens. The default value of 127.0.0.1 enables
the transfer server to accept transfer requests from
the local computer. If you set the address to 0.0.0.0,
the transfer server can accept requests on all network
interfaces. Alternatively, a specific network interface
address may be specified.
Port The port on which the transfer server accepts transfer
requests.
Persistent Enable to retain data that is stored in the database
Storage between reboots of asperacentral.
Files Per Session The maximum number of files that can be retained for
persistent storage.
Persistent
Storage Path
Maximum Age Maximum allowable age (in seconds) of data to be
(seconds) retained in the database.
Exit Central on The behavior of the asperacentral server if a database
Storage Error write error occurs.
Compact Enable or disable compacting (vacuuming) the
Database on database when the transfer server starts.
Startup
Ignore Empty Set to true to block the logging of zero-byte files.
Files
Ignore No- Set to true to block the logging of files that were not
transfer Files transferred because they exist at the destination.
Post-Transfer How many seconds to wait for a post-transfer validator
Validation to update the status of a file before the file is released
Timeout from the validator and its status is changed back to
"to_be_validated". This allows a file to be validated by
a different validator if the first validator stops working.
For more information, see
Validation
4. Save and validate aspera.conf.
Out-of-Transfer File
on page 80.
| Configure the Server from the Command Line | 70
<!-- Post-
Values Default
Valid IPv4 127.0.0.1
address
Positive integer 40001
1 - 65535
Enable or Enable
Disable
Positive integer 1000
Valid system If the application
path is installed in the
default location,
then the path is
the following:
Positive integer 86400
Ignore or Exit Ignore
Enable or Enable
Disable
true or false true
true or false true
Positive integer 300