Panasonic ES-RT84 Manual page 33

Cleaningtheshaverwithoutthe
self-cleaningrecharger
1. Disconnect the cord from the shaver.
2. Apply some hand soap and some
water to the system outer foil.
3. Turn the shaver on.
4. Turn off the shaver after 10 to 20
seconds.
5. Remove the outer foil section.
6. Clean the shaver and the outer foil
section with running water.
7. Wipe off any drops of water with a
dry cloth.
8. Dry the outer foil section and the
shaver completely.
9. Attach the outer foil section to the
shaver.
The mark on the left is for a washable shaver
and indicates it can be cleaned with water.
ES-RT84_CH.indb 33
Warning
Disconnectthecordfromtheshaverbefore
cleaningitinwatertopreventelectricshock.
► Dryingtheshaverwiththeself-cleaningrecharger 
1. Attach the outer foil section to the shaver.
2. Dry the shaver with self‑cleaning recharger using
"AUTO" mode.
Cleaningwiththebrush
►Cleaningwiththelongbrush 
Clean the system outer foil (a),
the shaver body (b) and the
trimmer (c) using the long brush.
►Cleaningwiththeshortbrush

Clean the inner blades using the
short brush by moving it in
direction (A).
• Do not move the short brush in
direction (B) as it will damage the
inner blades and affect their
sharpness.
• Do not use the short brush to
clean the outer foils.
  
(A) (B)
33
2013/07/17 14:27:45