Battery; Brake Shoe Wear - Honda CM 185T 1981 Manual

INSPECTION/ADJUSTMENT
Lubricate the drive chain. Saturate each chain
link joint.
NOTE
Commercial aerosol type drive chain lu-
bricants are recommended.'
Install the drive chain.
Install the master link.
Install the master link retaining clip so that
the closed end faces the direction of forward
wheel rotation.
Master links are reusable, if they remain in
excellent condition, but it is recommended
that a new master link be installed whenever
the drive chain is reassembled.
Adjust the drive chain (Page 3—10).

BATTERY

Remove the right side cover.
Inspect the battery fluid level.
When the f l u i d level nears the lower level,
refill w i t h distilled water to the upper level.
NOTE
Add only distilled water. Tap water will
shorten the service life of the battery.
WARNING
The battery electrolyte contains sulpheric
acid. Protect your eyes, skin, and cloth-
ing. In case of contact, flush thoroughly
with water and call a doctor if your
eyes were exposed.

BRAKE SHOE WEAR

Replace the brake shoes if the arrow mark
on the indicator plate aligns w i t h the " A "
mark of the brake panel when the brake is
applied.
Date of Issue: December, 1977
© H O N D A MOTOR CO., L T D .
3-11