IBM eServer xSeries Configuration And Options Manual page 78

SL
0
1
Removable
3
Media (RM)
Bays 4
5
Diskette
9
10
CD-ROM
11
Bay 1
13
Bay 2
14
Netfinity NetBAY3 (NB3)
(Optional on Tower Configurations)
1. The top bay is HH; all others are configured in groups of three SL bays.
When a HH drive is installed in one of these groups, only another HH or a
single SL drive can be installed in the same group. For clarity, the SCSI IDs
are identified.
The Netfinity 7600 contains a DASD backplane supporting ten hot-swap, SCA-2 compliant drive bays. The backplane is connected to the internal connector of the standard Netfinity
ServeRAID Adapter through a 16-bit LVD SCSI cable. External RAID support is provided through the two external 0.8-mm VHDCI connectors on the back of the adapter. To
support SCSI devices in the internal 133/89-mm (5.25/3.5-inch) half-high bays, a two-drop, 16-bit LVD SCSI cable with integrated terminator is included with the server. This cable
can be used to connect Channel B of the integrated Wide Ultra2 SCSI controller to SCSI devices in one or both of the removable media bays. Channel A, of the dual-channel, Wide
Ultra2 SCSI controller, only supports external SCSI attachment and is cabled directly to an external 0.8-mm VHDCI SCSI connector.
77
Updated
28/02/01
8
19K11xx
09N7296
9
19K11xx
10
19K11xx
19K1121
11
00N71xx
94G7448
1. Netfinity 7600 contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus speeds.
HH
2. Not supported by the onboard external SCSI port. Select an optional SCSI controller then refer to Appendix D: Cables-Storage
Units-Controllers to confirm the controller supports the desired External Storage Expansion Unit and to select a supported cable.
0
For HDD or other expansion unit options, see the specific expansion unit section.
3. The EXP300 includes a single 2 M Ultra2 SCSI cable and dual hot-swap 500 W power supplies, each with it's own standard
country power cord. To convert an EXP300 to a tower form factor, EXP300 Rack-to-Tower Conversion Kit P/N 09N7296 is
required.
2
4. The FAStT200 Storage Server and HA Storage Server each include two hot-swap, 350 W auto-ranging redundant power
supplies each with it's own standard country power cord.
4
5. Can be upgraded to a FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller P/N
Hot-Swap (HS)
19K1121.
Bays 10 x SL
6. The FAStT EXP500 Storage Expansion Unit includes dual hot-swap 350 W power supplies, each with it's own standard
-or-
country power cord.
8
7 x HH
7. These units do not include Rack Power Cables P/N 94G7448 when shipped (for attachment to high voltage UPS or PDU).
(SCSI IDs
Standard country power cords only are included. If required, order Rack Power Cables according to the number of power
10
shown)
supplies.
8.Where 'xx' represents a specific country code as follows: 51=US/English, 52=European/English, 56=Danish/English,
57=Israel/English, 58=Italian/English, 59=South Africa/English, 60=Swiss/English, 63=UK/English:- Line Cords/ Publication
12 Country Kits are included as indicated.
9.Where 'xx' represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish, 27=Euro/
German, 28=Denmark/English, 29=Israel/English, 30=Italy/English, 31=South Africa/English, 32=Switzerland/English,
14
34=Switzerland/German, 36=UK/English. Country/Language - Line Cords/Publications are included as indicated
10. Where 'xx' represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish, 41=Euro/
German, 42=Denmark/English, 43=Israel/English, 44=Italy/English, 45=South Africa/English, 46=Switzerland/English,
48=Switzerland/German, 50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
11. Where 'xx' represents a country specific code as follows:- 36=US/English, 37=Euro/English, 41=Denmark/English,
42=Israel/English, 43=Italy/English, 44=South Africa/English, 45=Switzerland/English, 49=UK/English. Country/Language
Line Cords/Publications are included as indicated.
4.
Internal SCSI Cabling
External Storage Expansion Units
3, 7
EXP300 Storage Expansion Unit
EXP300 Rack-to-Tower Conversion Kit
4, 5, 7
FAStT 200 Storage Server
4, 7
FAStT 200 HA Storage Server
5
FAStT 200 Redundant RAID Controller
6, 7
FAStT EXP500 Storage Expansion Unit
Rack Power Cable Type C12 (3.7m, 12 ft.)
2
Form Factor
Rack (3U)
-
Rack (3U)
Rack (3U)
-
Rack (3U)
7
-