IBM eServer xSeries Configuration And Options Manual page 31

1. Two half-high (HH) bays can be combined to support a single full-high (FH)
device. Installation of devices in Bays A or B may require Netfinity Hot-Swap
Power Supply Expansion Kit (P/N 37L6881) and at least one Netfinity 250 W Hot-
Swap Redundant Power Supply (P/N 33L37xx). Installation of HDDs in Bays A
and B also requires Media Bay Tray and LVD Cable Kit (P/N 10K2340).
2. Two slim-line (SL) bays (C/D, E/F, G/H) can be combined to support a single
half-high (HH) device.
For clarity purposes, bay labels in these
Tower Model View
diagrams are for reference by the
accompanying tables and are not the
Removable Media (RM)
actual labels. Refer to the documentation
shipped with the system for further details
A
on actual labels.
B
CD-ROM
Rack Model View
Hot-Swap
(HS)
C
D
Hot-Swap (HS)
E
F
G
G F
E
H
The xSeries 230 and Netfinity 5100 contain a DASD backplane supporting six hot-swap, SCA-2 compliant drive bays. The backplane is connected to channel A of the integrated
dual-channel, Ultra160 SCSI controller connector through a 16-bit LVD SCSI cable. If internal RAID support is required, this cable can be used to connect to a supported RAID
adapter rather than the integrated SCSI controller. No external SCSI port is included.
A two-drop, 16-bit LVD SCSI cable with integrated terminator is also included with the Netfinity Hot-Swap Power Supply Expansion Kit P/N 37L6881.This cable is included in the
expansion kit because installation of SCSI devices in bays A and B requires additional power. The two-drop cable supports up to two internal devices in these bays. This cable can be
attached to channel B of the integrated dual-channel Ultra160 SCSI controller or to a supported SCSI adapter.
To access IBM information specific to your country via the World Wide Web, use address: http://www.ibm.com/pc
37L7205
37L7206
19K0655
19K0656
20L0553
20L0554
10K2340
33L37xx
37L6881
External Storage Expansion Units
Removable Media (RM)
19K11xx
A
09N7296
B
19K11xx
CD-ROM
19K11xx
D
C
Diskette
19K1121
00N71xx
94G7448
1. Installation of non hot-swap HDDs requires both the tray and the cable in the Media Bay Kit P/N 10K2340
2. Additional power may be required when installing a SCSI device in bay A or B. Configurations exceeding four SL hot-
swap hard disk drives and two PCI adapters require both Hot-Swap Power Supply Upgrade Kit P/N 37L6881 and at least
one optional 250 W Hot-Swap Redundant Power Supply P/N 33L37xx. Example: 3 SL HS HDD's plus 5 adapters - no
additional power supply required. An optional SCSI cable is required. A two-drop terminated LVD SCSI cable is included
with both Media Bay Tray and LVD Cable Kit P/N 10K2340 and Hot-Swap Power Supply Upgrade Kit P/N 37L6881.
3. Media Bay Tray and LVD Cable Kit P/N 10K2340 is required. It contains a two-drop terminated LVD SCSI cable and the
hardware required to convert two half-high 5.25" removable media bays into two non-hot-swap 7200 RPM HDD bays.
4. Hot-Swap Power Supply Upgrade Kit P/N 37L6881 contains a hot-swap power backplane that supports installation for
up to three hot-swap power supplies.
5. Select an optional SCSI controller then refer to Appendix D: Cables-Storage Units-Controllers to confirm the controller
supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit
options, see the specific expansion unit section.
6. The EXP300 includes a single 2 M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each with it's
own standard country power cord.
7.The FAStT200 Storage Server and HA Storage Server each include two hot-swap, 350 W auto-ranging redundant power
supplies each with it's own standard country power cord.
8. Can be upgraded to a FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller
P/N 19K1121.
9. The FAStT EXP500 Storage Expansion Unit (P/N 00N71xx) includes dual hot-swap 350W power supplies each with it's
own standard country power cord.
10. These units do not include Rack Power Cables P/N 94G7448 when shipped (for attachment to high voltage UPS or
PDU). Standard country power cords only are included. If required, order Rack Power Cables (one for each power supply).
11. Where 'xx' refers to a country specific code: 60=Saudi Arabia, 61=Europe, 62=Denmark, 63=Israel, 64=Italy,
65=South Africa, 66=Switzerland, 67=United Kingdom&Arabia.
12.Where 'xx' represents a specific country code as follows: 51=US/English, 52=European/English, 56=Danish/English,
57=Israel/English, 58=Italian/English, 59=South Africa/English, 60=Swiss/English, 63=UK/English:- Line Cords/
Publication Country Kits are included as indicated.
13. Where 'xx' represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish,
27=Euro/German, 28=Denmark/English, 29=Israel/English, 30=Italy/English, 31=South Africa/English, 32=Switzerland/
English, 34=Switzerland/German, 36=UK/English. Country/Language - Line Cords/Publications are included as indicated
14. Where 'xx' represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish,
41=Euro/German, 42=Denmark/English, 43=Israel/English, 44=Italy/English, 45=South Africa/English, 46=Switzerland/
English, 48=Switzerland/German, 50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
15. Where 'xx' represents a country specific code as follows:- 36=US/English, 37=Euro/English, 41=Denmark/English,
42=Israel/English, 43=Italy/English, 44=South Africa/English, 45=Switzerland/English, 49=UK/English. Country/
Language Line Cords/Publications are included as indicated.
xSeries 230 / Netfinity 5100 Internal SCSI Cabling
18.2 GB 10K-4 Ultra160 SCSI Hot-
Swap HDD
36.4 GB 10K-4 Ultra160 SCSI Hot-
Swap HDD
9.1 GB 15K-rpm Ultra160 SCSI Hot-
Swap HDD
18.2 GB 15K-rpm Ultra160 SCSI
Hot-Swap HDD
Non-Hot-Swap Ultra2 SCSI HDDs
2
9.1 GB Wide Ultra2 SCSI HDD
2
18.2 GB Wide Ultra2 SCSI HDD
Associated Options
Media Bay Tray and LVD Cable Kit
250 W Hot-Swap Redundant Power
11
Supply
Hot-Swap Power Supply Upgrade
4
Kit
5
12 6, 10
EXP300 Storage Expansion Unit
EXP300 Rack-to-Tower Conversion
Kit
13 7, 8, 10
FAStT 200 Storage Server
14 7, 10
FAStT 200 HA Storage Server
FAStT 200 Redundant RAID
8
Controller
FAStT EXP500 Storage Expansion
15
9, 10
Unit
10
Rack Power Cable Type C12 (3.7m)
10,000 SL C...H
10,000 SL C...H
15,000 SL C...H
15,000 SL C...H
1
3
7200 SL A, B
3
7200 SL A, B
3
- - A+B
- - -
- - -
Form
Factor
Rack (3U)
-
Rack (3U)
Rack (3U)
-
Rack (3U)
-
6
6
6
6
2
2
1
-
-
30
Updated
28/02/01