Version Information - Omron NX Series Manual

NX-CSG/SL5/SI/SO

Version Information

Relationship between the Unit Versions of Safety Control Units and Sysmac Studio Versions
This section describes the combinations that can be used of the unit versions of the Safety Control Unit and the Communication Control Unit, and
the version of the Sysmac Studio.
Safety Control Units
Model
NX-SL5500
NX-SL5700
NX-SIH400
NX-SIH400
NX-SID800
NX-SOD400
NX-SOH200
*1. The data types in the following table are supported for communications between NX Units.
Supported data types
BOOL
BYTE
INT
WORD
DINT
*2. Communications between NX Units are not supported.
13
NX Unit
Unit version
Ver. 1.3
Ver. 1.3
Ver. 1.0
Ver. 1.1
Ver. 1.0
Ver. 1.0
Ver. 1.0
Corresponding unit version/version
Communication Control Unit
Ver. 1.01
Ver. 1.01
Ver. 1.00
Ver. 1.00
Ver. 1.00
Ver. 1.00
Ver. 1.00
Sysmac Studio
Ver. 1.24 or higher *1
Ver. 1.24 or higher *1
Ver. 1.24 or higher *2
Ver. 1.24 or higher *2
Ver. 1.24 or higher *2
Ver. 1.24 or higher *2
Ver. 1.24 or higher *2